LCD (Liquid Crystal Display) Module Removal
Prerequisite:
Mainboard Removal
1. Peel the left end of the tape (C) securing the antenna on the base assembly and
remove the antennas (B) from the cable guides
2. Remove three (3) screws (A) from LCD hinges
Figure 3-35. LCD Module
3. Remove the LCD module from the base assembly
Figure 3-36. LCD Module Removal
3-34
A
(Figure
3-35).
(Figure
3-35).
C
B
(Figure
3-36).
Machine Maintenance Procedures
0
A