Image" Menu; Color Mode; Color Saturation - Epson dreamio EMP-TW2000 User Manual

Configuration Menu Functions

"Image" menu

Color Mode

Seven different settings can be selected for the Color Mode, to match the images being projected or the
projection environment.
Brightness
Adjustment is not possible when "Color Mode" is set to "x.v. Color".
Adjust this when the output level of the connected equipment is weak and you feel that images are dark.
Contrast
Adjustment is not possible when "Color Mode" is set to "x.v. Color".
Adjusts the difference between bright and dark areas.
When the contrast is increased, images with greater modulation are obtained.

Color Saturation

Adjustment is not possible when "Color Mode" is set to "x.v. Color".
This adjusts the colour intensity for the images.
*2
Tint
(Adjustment is only possible when composite video and S-Video signals in NTSC format are being
input. Adjustment is not possible, however, when "Color Mode" is set to "x.v. Color.")
This adjusts the image tint.
Sharpness
This adjusts the image sharpness.
Standard
The adjustment results are applied to the entire image.
Advanced
This can be used to adjust a specific region.
Abs. Color Temp.
Adjustment is not possible when "Color Mode" is set to "x.v. Color".
This adjusts the overall tints of the images.
Skin Tone
Adjustment is not possible when "Color Mode" is set to "x.v. Color".
This adjusts the skin tones of people who appear in the images.
Advanced
Adjustment is not possible when "Color Mode" is set to "x.v. Color".
*1
Gamma
This adjusts gamma. You can select a value, or make adjustments while viewing an image or a graph.
p.20
*1
RGB
This lets you adjust the offset and gain for each of the R/G/B colour components.
RGBCMY
This lets you adjust the hue, saturation, and brightness for each of the R/G/B/C/M/Y colour components.
p.22
30
*1
p.18
*2
*2
*2
*2
*2
*2
*1
*1 The setting values are stored separately for each image source and signal type.
*2 The setting values are stored separately for each image source and colour mode setting.
Displayed for input sources other than computer
p.23
p.20
p.20
p.22