Remote Control
Buttons with no explanation function in the same way as the corresponding buttons on the projector's
control panel. Refer to "Control Panel" for further details on these buttons.
• • • •
Remote control light-emitting area
Setup Guide
Outputs remote control signals.
• • • •
Indicator
Illuminates when remote control
signals are being output.
• • • •
Menu button
p.23
• • • •
Memory button
p.12
Displays a selection menu for
selecting memory settings.
• • • •
Select/Line menu button
p.8, p.12, p.23
• • • •
buttons
p.8, p.12, p.23, Setup Guide
Press to select configuration menu and
selection menu items and adjustment
values and to adjust the zoom and focus.
• • • •
Pattern button
Setup Guide
Displays a selection menu for
selecting a test pattern.
• • • •
Zoom button
Setup Guide
• • • •
Blank button
The projected images switch off and
on each time this button is pressed.
• • • •
(Illumination) button
All buttons on the remote control
illuminate when this button is pressed.
The button illumination switches off
automatically after about 10 seconds
have passed.
Part names and Functions
• • • •
Setup Guide
On/Off buttons
Press to turn the projector power on
and off.
• • • •
Color Mode button
Displays a selection menu for
selecting the colour mode.
• • • •
Aspect button
p.8
• • • •
Esc button
p.23
Source
Setup Guide
• • • •
D4 button: Switches the input source
to the projector's [D4] port. The
signal changes as follows and the
"Input Signal" menu also
changes each time the button is
pressed.
YCbCr
YPbPr
• • • •
InputA button: Switches the input
source to the projector's [InputA]
port. The signal changes as
follows and the "Input Signal"
menu also changes each time the
button is pressed.
YCbCr
YPbPr
RGB-Video
• • • •
InputB button: Switches the input
source to the projector's [InputB]
port.
• • • •
S-Video button: Switches the input
source to the projector's [S-
Video] port.
• • • •
Video button: Switches the input
source to the projector's [Video]
port.
• • • •
Focus button
Setup Guide
p.8
5