Saving Adjustment/Loading Adjustments From A File - Epson dreamio EMP-TW200 User Manual

Check that the power for the projector to be adjusted is turned on, then start Cinema Color Editor.
For Windows : Click "Start"
For Macintosh : Click "Finder" and then "Applications" from the "Dock (Macintosh HD)", and then
(Names may vary
double-click "CCEditor" and "Cinema Color Editor (V1.0)" in that order.
depending on the
version being used.)
After the opening screen, the connection screen will be displayed.
The connected projectors will be displayed, so select the projector that you would like to adjust the images
for, then click [Connect].
Projector image adjustments and remote control operations can be carried out easily using a mouse.
Items that can be set
Click a button at the left of the window to
carry out the following adjustments. The same
adjustment as the corresponding configuration
menu command can be carried out.
White Level/Black Level
Input Level/Contrast
Color Intensity Tint
Color Temp. Tracking*
Color Mode Color Adjustment
Progressive Noise Reduction
Output Scaling Setup Level
Auto Setup*
* Only displayed when RGB-video/computer
signals are being input.
Cinema Color Editor can be used to
make colour adjustments such as hue
and saturation for red (R), green (G),
blue (B), cyan (C), magenta (M) and
yellow (Y) colours in order to obtain
the preferred colours for images. You
can reproduce the colours for a
favourite movie to appear as though
you are in a cinema, or adjust the
colours to completely different
colours if desired.
Hue : Adjusts the overall
coloration of the images
towards blue, green or red.
Saturation : Adjusts the overall
brightness of the images.
"Programs" "EPSON Projector"
p.14
Brightness
Sharpness
Sync.*
Saving adjustments/Loading
Saving adjustments/Loading
adjustments from a file
adjustments from a file
The adjustment settings of the projected images can be saved as
computer files. The adjustments stored in these files can then
be reloaded and applied to the projected images. In addition,
these files can be sent to other people so that they can view the
effects of your adjustments. You can also load the adjustment
settings from a computer file into projector memory and
retrieve them.
Saving files and applying settings is done from the "File" menu.
"Cinema Color Editor" in that order.
Click the item to be set.
If typing in values with decimal
points, such as gamma values,
use the "." character as the
decimal point. "," cannot be used.
p.28
Saves current projector settings in
a file
Adjustment values saved in the file
are applied to the currently
projected images.
Using Cinema Color Editor
Remote control window
Click a button to carry
out the same
operation as the
remote control button.
27