Epson dreamio EMP-TW200 User Manual page 22

Configuration Menu Functions
Trigger Out
This turns the trigger function on and off to determine whether the projector's power on/
off status and problems with projector operation are communicated to an external
device.
If you change the setting, the new setting will take effect after the power has been turned
off and the cool-down period is complete.
Lock Setting
This sets whether the following lock functions are turned on or off. When a lock
function is turned on, a
out.
•
Focus Lock :Focus adjustment is disabled.
•
Zoom Lock :Zoom adjustment is disabled.
•
Child Lock :This locks the power on function of the
control panel, so that a child cannot accidentally turn the projector's power on and
look into the projector's lens.
When the lock is applied, the power will only turn on if
3 seconds.
to operate as normal.
The remote control operation is unaffected by this setting.
If you change the setting, the new setting will take effect after the power has been
turned off and the cool-down period is complete.
•
Key Lock :The buttons on the projector's control panel will not operate.
(If this is set to "ON", the "Child Lock" setting cannot be made.)
If you change the setting, the new setting will take effect after the configuration menu
is disappears.
On-Screen Display
Menu Position
Press
Navigation Bar
This sets whether the navigation bar for the configuration menus is displayed (ON) or
not displayed (OFF).
Menu Color
The colour for the main configuration menu (full menu) and the navigation bar can be
selected as follows.
•
Color 1: Blue
Message
This sets whether the following message displays appear (ON) or don't appear (OFF).
•
Image signal, colour mode , aspect
retrieved
•
Messages such as when no image signals are being input, when an incompatible
signal is input, and when the internal temperature rises
Background Color
Selects the screen status when a blank screen or the start-up screen (the image that is
projected when projection starts) is being projected.
20
is displayed on the screen when a locked operation is carried
can be used to turn off the power, and the remote control will continue
, , and to specify the position for the full menu to be displayed.
•
Color 2: Green
button on the projector's
is pressed down for about
•
Color 3:Red
and item name when memory settings are
OFF
OFF
OFF
OFF
OFF
Default setting
Center
ON
Color 1
ON
Black