The Projector Will Not Switch Off (After The [Power] Button Has Been Pressed); Emp Link V Will Not Function - Epson EMP-8150NL Owner's Manual

The projector will not switch off
(after the [Power] button has been pressed)
G
OFF
G

EMP Link V will not function

G
G
G
G
G
G
Point
If an abnormality remains after checking the results of the above inspections, disconnect
the Power Plug from the socket and consult with your dealer.
Is the Operation Indicator illuminated in orange?
The projector has been designed so that the Operation Indicator is not
extinguished even when the power has been switched off.
The Operation Indicator will be extinguished when the Power Plug
has been disconnected from the socket.
The fan will not cease operations.
The cool-down process (to allow the projector lamp to cool down; the
operation indicator will blink in orange) will be performed after the
power has been switch off by pressing the [Power] button. The
operation indicator will be illuminated in orange when this has been
completed, so remove the power plug from the socket at this point.
*The amount of time required for the cool-down process will depend
on the external temperature.
Are the connection settings correct?
Select a COM port number that is not being used by a printer or
modem.
Have the cables been connected correctly?
Were the connections established with the power supply switched
off?
Is the signal extension cord too long?
Did installation end normally?
Re-install if not.
Has the power supply to the projector been switched on?
Reboot the computer.
When the Indicators Provide No Help - 93