TM
The FPI AstroCap
and FPI Riser Vent terminal is certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent®, Direct Vent GS,
American Metal Products, Ameri Vent Direct vent and Selkirk Direct-Temp. FPI
Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.
UltraGlow G33R-1 Zero Clearance Rear Vent Direct Vent Gas Fireplace
RIGID PIPE VENTING SYSTEMS
Horizontal or Vertical Terminations
Vertical
Termination
Cap
Storm Collar
Adjustable
Flashing
0/12 to 6/12
Pipe Length
(see parts list)
Pipe Length
(if required)
Elbow
Rigid Pipe Adaptor
(Part# 510-994)
(D)
Vertical termination kit
(part #978)
Wall Thimble
(Part #942)
Elbow
TM
, and FPI AstroCap
INSTALLATION
Vent Guard
946-506/P
(optional)
AstroCap
Termination Cap
(Part# 946-523)
(patent pending)
(C)
Vinyl siding
standoff
(Optional)
(B)
Alternate Horizontal
Termination Caps
Alternate Snorkel Ter-
mination Cap Part#
982 (14")
Part# 981 (36")
Alternate Horizontal
Riser Vent Terminal
Part# 640-530/P
WARNING:
Do not combine venting components from
different venting systems.
However use of the the AstroCap
Riser is acceptable with all systems.
This product has been evaluated by Intertek for
using a Dura-Vent Flue Adaptor in conjunction
with Selkirk Direct-Temp and Ameri Vent Direct
venting systems. Use of these systems with the
Direct Vent GS starting collar is deemed accept-
able and does not affect the Intertek WHI listing
of components.
When using piping other than Simpson
Dura-Vent, 3 screws must be used to
secure rigid pipe to adaptor.
TM
are the proprietary trademarks of FPI Fireplace
TM
and FPI
15