Setting Time & Day; Receiver Operation - Regency FireGenie Installation & Operating Instructions Manual

Setting Time & Day
Note: The Remote Control Keypad must be "ON" in order to set the Time & Day.
Time
Press and hold the "TIME" button for 2 seconds and then use the "+" button to set the hour and
use the "-" button to set the minute.
Day
Press the "TIME" button again and use the "+" or "-" button to set the day.
Press the "TIME" button once more to record the setting.
The Remote Receiver has 3 operating modes, namely ON, OFF and Remote. The operating mode is
selected by means of a slide switch on the front panel of the Receiver.
ON: When "ON" Mode is selected, the fl ame will turn ON.
OFF: When "OFF" Mode is selected, the fl ame will turn OFF. However, the unit can be turned ON
or OFF with the standard ON/OFF switch.
Remote: When Remote Mode is selected, the Receiver will turn the fl ame ON or OFF depending on
the setting of the Remote Control.
FPI FireGenie TM Remote Control Manual

RECEIVER OPERATION

Receiver
7