Epson EMP-7350 Owner's Manual page 33

Connecting the Video Cable
First connect the projector's video cable to your laptop.
1. Connect one end of the computer cable to the projector's
Computer 1 port. (Use the Computer 2 port if you are
connecting a second computer.)
2. Connect the other end of the video cable to the laptop's
video (monitor) port.
3. Tighten the screws on all connectors.
Connecting the Mouse and Serial Cables
If you want to use the remote control as a mouse or use the
ELP Link IV software, you need to connect the main cable. It
provides connectors for:
1. The PS/2 mouse cable or USB mouse cable (to use the
remote control as a mouse)
2. The serial cable (to use the ELP Link IV software and the
Effects buttons on the remote control)
Computer 1 port
computer cable
Connecting to a Computer 13