Epson EMP-7350 Owner's Manual page 25

Note: When using the optional lens, refer to the Owner's
manuals attached to it.
3. Turn the projector so that the lens is at right angles to the
screen. If the projector is not angled correctly, the screen
image will be crooked.
4. Connect one end of the power cable to the projector's
power connector. Connect the other end to an earthed
electrical socket.
The projector should be in sleep mode, indicated by an
orange power indicator.
Warning: Never look into the lens when the projector is on.
There is a risk that the projector might come on suddenly even
though it is not in use. The light from the lamp can damage your
eyes. It is especially important that children should not be
allowed to look into the lens.
5. To insert the batteries in the remote control device, slide
off the battery compartment cover.
Setting Up the Projector 5