Sharp AQUOS LC-32D47UT Operation Manual page 18

On-Screen DispJay Menu
Adjusts the picture to your preference with the
following picture settings.
Example J _ Picture
I
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less For more
brightness brightness
Color For less color For more color
intensity intensity
Tint Skin tones Skin tones
become reddish become greenish
Sharpness For less For more
sharpness sharpness
For resetting all Pbture adjustment items to the factory
preset values, press j,/T to select "Reset", press ENTER,
press A/_' to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
On(Display}: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
On: Automatically adjusts.
Off: The brightness is fixed at the value set in "Baoklight".
yCf_ ,
o When set to "On", the Optical Picture Control (OPC) senses
the surrounding light and automatically adjusts the backlight
brightness. Make sure nothing obstnJcts the OPC sensor,
which could affect its ability to sense surrounding light.
o When set to "On(Display)", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
This TV provides various advanced functions for
optimizing the picture quality.
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
o For resetting all adjustment items to the factory preset
values, press A/_F to select "Reset", and then press
ENTER.
For a better white balance, use color temperature
correction.
High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone
Automatically adjusts the irrlage contrast according to
the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
On: Detects, analyzes, converts film soume.
Off: Normal viewing mode.
' _£#I',_,f
o "Film Mode" is not selectable when channel display shows
an input resolution of 480p or 720p.
B_
Produces a clearer video image.
Off: No adjustment
High/Middle/Low: Select a desired level for viewing a
clearer video image.
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off: For Game Mode.
o 3D Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
18