Sharp AQUOS LC-32D47UT Operation Manual page 17

On-Screen Display Menu
" Wr ih,
Example Example
Audio Only
®
®
Tr_he bar above is an operational guide for
| "1
the remote control. The bar will change in |
[. accordance with each menu setting screen. J
1 Press MENU to display the MENU screen.
2 (!) Press _/_ to select the desired menu.
(_) Press ,&/V to select a specific adjustment item,
and then press ENTER.
13_ Press A/Y (or 4/_) to select or adjust the
desired setting, and then press ENTER.
3 Press MENU to exit.
Item displayed in yellow
o This indicates the item currently selected.
o Press ENTER to go to the adjustment screen for this
item.
Item displayed in white
• This indicates that the item can be selected.
Item displayed in gray
o This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, bat the main reasons are as follows:
--Nothing is connected to the selected input terminal.
--The function is not compatible with the current input
signal.
o Menu options differ in the selected input modes, but the
operating procedures are the same.
o The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightS/from the actual screens.
n iiiii_,,
Using the remote control
Use the following buttons on the remote control to
operate the menu.
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
MENU: Press to open or close the menu screen.
_,/Y/_I/I_: Press to select a desired item on the screen or
adjust a selected item.
ENTER: Press to go to the next step or complete the
setting.
RETURN: Press to return to the previous step.
_ MENU: MENU on the remote
control.
INPUT: ENTER on the remote
control
CNik/Vz Cursor A/T on the
remote control.
VOL +/-:Cursor 41/1_ on the
remote control.
17