Using Add/Del/Surf - Zenith SYSTEM 3 Z36X31 Operating Manual & Warranty

SETUP MENU
USING ADD/DEi./SURF
I
÷
Point Remote at TV
SURF Button
CHANNEL Up/Down
These channels are ,_el_zted by using
the CHANNEL Up/Down arrows.
Channels found by Auto Program
are set as "Added" channels.
"1. Use the UplDown arrows to choose,
Add/Del/Surf.
2. Select a channel using the numbers
on the remote.
3. Use the Left/Right arrows to show
Added.
4. Press QUIT to :remove the menu .
from view.
These channels ao_ not selected
when you use the CHANNEL
Up/Down arrows. Select them
directly by using the numbers on the
remote.
1. Use the Up/DowrL arrows to choose
Add/Del/Surf.
2. Select a channel using the numbers
on the remote.
3. Use the Left/Right arrows to show
Deleted.
4. Press QUIT to remove the menu
from view.
[Surf's Up! "_-]
I No Surfing
@)l
"SURF" channels form a list of your favorite channels.
When the "SURF" mode is On, these are the only _,_els
that you'll see with the CHANNEL Up/Dowa arrows.
1. Use the Up/Down arrows to choose Add/Del/Suff.
2. Select a channel using the lmmbers on the remote.
3. Use the Left/Right arrows to show Surf.
4. Repeat steps 2 and 3 to ma_:e your most frequently
watched channels "Surf" channels.
5. Press QUIT to remove the menu from view.
To turn On "SURF,", press SURF on the remote.
[Surf's Up! "_-1 appears on the screen.
To turn off "SURF," press SERF again.
[____ appears on the screen.
_ 3 _ 2.