Zenith SR2786 Operating Manual & Warranty page 10

STANDARD CONNECTIONS FOR YOUR TV
AUDIO/VIDEO (A/V) CONNECTIONS FOR OPTIONAL VIDEO EQUIPMENT
Connections to VIDEO 3 IN
or S-VIDEO 2 IN jacks.
(Some "IV models only.)
Stereo Cameorder
Super-VHS VCR
Y_V1DEO
OUT
OPTIONAL AUDIO AMPLIFIER/SURROUND SOUND CONNECTIONS TO TV
If you wish to listen to the'IV audio through an external amplifier or stereo system, or listen to surround sound audio, make the connec-
tions
to
the TV shown in the illustration below.
TURN OFF POWER OR UNPLUG TV BEFORE MAKING ANY CONNECTION.
8ohm
Surround
Speaker
Amplifier and Dual Surround Speaker Connections
Single Surround Speaker Connection
DIFFERENT WAYS TO LISTEN TO YOUR "IV
Surround Sound
e
'IV Speakers On
* SPEAKER EXT/INT switch in the INT (in-
ternal) position --
TV speakers are ON. Sound is heard from
both the TV's speakers and the external am-
plifier's speakers.
• Use TV's volume control to raise and
lower the level of sound being heard from
both sets of speakers.
TV Speakers Off
• SPEAKER EXT/INT switch in the EXT
(external) position
TV speakers are OFF. Sound is only heard
from the speakers connected to the external
amplifier.
• Use TV's volume control to raise and
lower the level of sound being heard from
the amplifier's speakers.
Connect surround sound speakers as shown.
The level of surround sound will vary,
depending on the program being viewed.
Note that not all programs have surround
sound audio.
• The SURROUND SPKR terminals are
always active. The SPEAKERS EXT/INT
switch does not affect the operation of
surround sound speakers.
• If you want to connect only one surround
speaker to your TV, connect the speaker
wires to the terminals adjacent to the
positive (+) and negative (-) symbols that
are circled.
291s-ot.^ 1 -- 5