Using Parental Control - Zenith SENTRY 2 Z25A65 Operating Manual & Warranty

SETUP MENU
USING PARENTAL CONTROL
_ arental
Menu
[gloc.k Channel ]
Set Hours
Set Password
Lock On/Off
[Ch 9 Blocked I
1<I' 01 Hours I
IEnter Code: x x x x I
I on I.
Parental Control Menu
,
Remember your pass-
word! To re-enter paren-
tal control while it's on,
you must enter this num-
ber. Otherwise, you'll
have to wait for the speci-
fied time period to elapse.
.
2.
3.
4.
5.
6.
To Block Channels or the Video Input Source
Select Parental Ctl and press a Left/Right arrow to view the Parental
Control menu.
Select Block Ch. (channel).
Use the numbers on the remote to enter a channel number and press a Left/Right arrow
to show Blocked.
Repeat steps 3 and 4 for each channel you want blocked.
Select Block Video to block the video source input and press a Left/Right arrow to
show Source Blocked.
After you block all desired channels and/or the Video source, select Set
Hours and use the Left/Right arrows to choose the time period you want
Parental Control to be active: from 1 hour to 99 hours.
7. Select Set Password.
8. Press a LefURight arrow and enter a 4-digit password when prompted.
(Verify the password by entering it a second time.)
9. Select Lock On/Off and use the LePt/Right arrows to show On.
10. Press QUIT to remove the menu from view. '.
Notes:
[] Do not try to deactivate the Parental Control by unplugging your TV. This
only restarts Parental Control lock time.
[21 Parental Control cannot be turned On (Lock On/Off) until the Hours mid Pass-
word have been set.
3201-0
4m5
€
i