Ldap Operation (For Mfc-J2510/J4510Dw/J4710Dw); Overview; Changing The Ldap Configuration Using A Browser; Ldap Operation Using The Control Panel - Brother MFC-J4310DW Network User's Manual

LDAP operation
6
(For MFC-J2510/J4510DW/J4710DW)

Overview

The LDAP protocol allows you to search for information such as fax numbers and E-mail addresses from your
server. When you use Fax, I-Fax or Scan to E-mail server features, you can use the LDAP search to find fax
numbers or E-mail addresses.
NOTE
The LDAP Protocol does not support simplified Chinese, traditional Chinese and Korean.

Changing the LDAP configuration using a Browser

You can configure and change LDAP settings using a web browser. (For more information, see Changing the
LDAP configuration using a web browser (For MFC-J2510/J4510DW/J4710DW) (Available as a download)
on page 56.)

LDAP operation using the control panel

After you configure LDAP settings, you can use the LDAP search to find fax numbers or E-mail addresses for
the following features.
 Fax sending
 I-Fax sending
 Scan to E-mail server
For Fax sending and I-Fax sending, follow the steps below.
For Scan to E-mail server, see Software User's Guide.
a
Load your document.
b
Press Fax.
c
Press Address Book.
d
Press to search.
e
Enter initial characters for your search by using the buttons on the LCD.
NOTE
• You can enter up to 15 characters.
• For information on how to enter text, see the Quick Setup Guide.
f
Press OK.
The LDAP search result will be shown on the LCD with before the local address book search result.
6
6
6
6
6
57