Brother MFC-9970CDW Network User's Manual page 63

Web Based Management
c
Click FTP/Network Scan Profile on Administrator Settings page.
Now you can configure and change the following Scan to FTP settings using a web browser.
 Profile Name (Up to 15 characters)
Host Address (FTP server address)

Username

 Password
 Store Directory
 File Name
 Quality
 File Type
 File Size
 Passive Mode
 Port Number
You can set Passive Mode to Off or On depending on your FTP server and network firewall configuration.
By default this setting is On, you can also change the port number used to access the FTP server. The default
for this setting is port 21. In most cases these two settings can remain as default.
Note
Scan to FTP is available when FTP server profiles are configured using Web Based Management.
6
58