Storage - Cub Cadet LT1042 Operator's Manual

21” self-propelled mower
Hide thumbs Also See for LT1042:
Table of Contents

Advertisement

Storage

Engine to be stored over 30 days should be completely
drained of fuel (gasoline) to prevent gum deposits
forming on essential carburetor parts and the fuel
system.
WARNING:
flammable and can be explosive under
certain
conditions.
before
storing
extended periods. Drain gasoline in a
well-ventilated area away from any
source of flame or sparks, including any
appliances with a pilot light. Store
gasoline in an approved container in
safe location.
Remove the spark plug cap from spark plug to
prevent accidental starting the engine.
Empty the fuel from the fuel tank with a pump or
siphon.
Fit the plug cap on the spark plug securely
Start and run the engine at idle speed to used up
the fuel in the fuel system.
WARNING: Before maintaining engine,
stop the engine and allow it cool.
Remove the spark plug and pour approx. 1-2 mL
(0.06-0.1 cu.in) of new engine oil through the plug
hole (A), slowly pull the recoil starter grip several
times and reinstall the spark plug.
Gasoline
is
extremely
Drain
gasoline
the
equipment
for
A. Spark Plug Hole
Slowly pull the recoil starter grip until you feel
compression and leave it there.
Clean every part of the engine.
After period of storage, change engine oil.
(Refer to "Oil Change" section in
"MAINTENANCE" section).
34
Figure 20
Figure 21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lt1045Lt1046Lt1050387

Table of Contents