Epson EB-W8D User Manual page 65

Option page
Setting Item
Mic Input Level
User Button
Child Lock
Use on the main unit to lock the power-
on.
High Altitude Mode
Set this mode when you use this unit at high
altitudes.
Info page
Item
Information
Lamp Hours: Total usage time of the lamp. 0H is displayed for 0 to 10 hours. Changes to units of
Displays the
current status.
Source:
Video Signal:This is displayed when "Video" is selected as the "Source", and displays the format
Resolution: The resolution is displayed if the "Source" is other than "Video". The resolution of
Status:
Reset Lamp After you have replaced the unit lamp, initialize the lamp hour settings. The accumulated lamp
Hours
operating time is cleared.
Adjust if the Mic Input Level is too low to hear from the projector's
speaker, or if the level is too high making the audio crack. When the
Mic Input Level is turned down to "0", no audio is output from the
speaker.
You can select the item assigned from the Visual Setup menu with
the remote control's
menu item selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments. You can assign one of the
following three items to the
Power Consumption, Info, Resolution
On: Starts the Child Lock. To turn the power supply on, hold
down
hold down
Off: Cancels the Child Lock.
When using this unit at high altitudes, that is 1500 meters or more
above sea level, turn this mode "On".
1 hour at 10 hours and above. The display turns yellow text when it is time to
change the lamp.
Displays whether standard DVD player images are being projected, or images from
external video equipment or a computer are being projected.
of the video signal being input.
image signals from a computer and the component video signals that are being input
are displayed.
Displays any error information. You may be asked for this information when you
contact your service center.
Setting Contents
. By pressing the
.
on the main unit for approximately 5 seconds or
on the remote control.
Contents
the assigned
63