Parts Name And Functions - Epson EB-W8D User Manual

Parts Name and Functions

Front
A
B
C
D
E
F
G
Name
A
Slide lens cover knob.
B
Slide lens cover
C
Disc indicator
D
Eject button
E
Disc slot
F
Foot adjust lever
G
Front adjustable foot
H
Headphone jack
I
Handle (Security cable
installation point)
J
Security slot (j)
K
Air intake vent
(Air filter cover)
L
Remote control light-
receiving area
M
Projection lens
12
Slide the knob to open and close the slide lens cover.
Close the lens cover to protect the lens when the unit is not in use.
You can stop the projection completely by closing the lens cover during projection. However, if
this state continues for 30 minutes, the unit lamp is turned off automatically.
Lights up green when a disc is inserted into the disc slot.
Press this button to eject a disc from the disc slot.
Insert a disc you wish to play.
Press the Foot adjust lever to extend and retract the Front adjustable foot.
The feet on the side of the projection lens can be extended by turning them. Extending the feet to
the maximum extent tilts this unit by approximately 10 degrees.
Connects a headphone to the unit.
Hold this handle when carrying the unit.
Pass a commercially available wire lock through here and lock it in place.
The Security slot is compatible with the Microsaver Security System manufactured by Kensington.
s
p. 66
Take the cooling air into the unit. If dust collects on the air intake vent it can cause the internal
temperature of the unit to rise, and this can lead to operation problems and a shortening of the
service life of optical parts. Clean it periodically.
Receives signals from the remote control.
Projects an image.
Function
s
s
p. 22
s
p. 19
s
p. 52
s
p. 9
s
p. 72
s
p. 16
s
p. 18
p. 19
s
p. 21
s
p. 21
s
p. 66
M
L
K
J
I
H
F