Adjusting The Image - Epson EB G5200WNL User Manual

note
The available settings vary
depending on the input
source selected.
note
The setting
Brightness
changes the opacity of the
projector's LCD panels. You
can also change the lamp's
brightness. Select
in the
Brightness Control
Settings menu, then choose
or (the default
High Low
setting is ).
High
Fine-Tuning the Projector
96

Adjusting the Image

You can use the Image menu to adjust the brightness, sharpness, color,
tint, and contrast.
1. Press the button on the projector or remote control and
Menu
select the menu.
Image
You see a screen similar to one of those below. (The settings will
be different depending on the source you are projecting from.)
Computer/RGB Video
2. Use the pointer button to highlight the desired option, then
adjust it as needed:
■ Color Mode
Lets you quickly adjust the color and brightness for various
environments. Use either the remote control or the
setting in the Image menu. You can save a different
Mode
setting for each source. See page 49 for more information on
each color mode.
■
Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas.
■ Color Saturation
Adjusts the color depth of the image.
■ Tint
Adjusts the balance of green to magenta in the image.
Component Video/
Composite Video/
S-Video
Color