Input Signal - Epson Dreamio EMP-TW1000 U User Manual

Configuration Menu Functions
Projection
This should be set in accordance with the method used to set up the projector.
• Front
• Front/Ceiling : Select when the projector is set up in front of the screen and suspended from a ceiling.
• Rear
• Rear/Ceiling : Select when the projector is set up behind the screen and suspended from a ceiling.
Display
Menu Position
Press ,
Menu Color
Selects the color for the main configuration menu.
• Color 1:Black
Messages
This sets whether the following message displays appear (On) or don't appear (Off).
• Image signal, colour mode, aspect and item name when memory settings are retrieved.
• Messages such as when no image signals are being input, when an incompatible signal is input, and
when the internal temperature rises.
Display Background
Displays a menu for selecting the screen status for when using the blank function or when no image
signal is input.
Startup Screen
This sets whether the start-up screen (the image that is projected when projection starts) is displayed (On)
or not displayed (Off).
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.

Input Signal

Video Signal
Sets the signal format in accordance with the video equipment that is connected to the [Video] or [S-
Video] input port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being projected occurs even
though "Auto" has been selected, select the correct signal format manually.
Component
Change this setting depending on the type of signal that is being output from the video equipment that is
connected to the [Component] input port.
If "Auto" is selected, appropriate signal is automatically set. If colours appear unnatural even though
"Auto" is selected, select appropriate signal name in the menu.
D/SCART
This sets the signal format in accordance with the signals being output from video equipment that is
connected to the [SCART] port (in Europe) or [D] port (in Japan).
Language
This sets the display language for messages and menus.
34
: Select when the projector is set up in front of the screen.
: Select when the projector is set up behind the screen.
, and to specify the position for the menus to be displayed.
• Color 2:Blue