Removing The Memory Module - Zotac ZBOX SD-ID10 User Manual

2. Gently press down on the memory module until it is locked by the arms of the socket.
This ZOTAC ZBOX accomodates two

install at least one module in any of the two slots.

Removing the memory module

1. Remove the cover of your ZOTAC ZBOX.
2. Gently press the two arms securing the memory in the socket as shown in the image
below to release the memory module.
3. The memory module can be easily taken out.
SO-DIMM DDRII memory modules. You must
ZOTAC ZBOX
9