note
The Easy Management
software cannot be installed
on Macintosh systems.
Managing the Projector from a Remote Computer
86
Installing the Easy Management
Software
The projector software CD-ROM includes the software you need to
use the projector's EMP Monitor and EMP NetworkManager.
System Requirements
Before you install the software, make sure your computer meets these
requirements:
®
Microsoft
Windows 98 SE, XP, 2000, Me, or NT 4.0 (service
■
pack 6a or later)
®
Pentium
MMX 166 MHz processor (Pentium II 233 MHz or
■
better recommended)
At least 256MB of RAM
■
At least 7MB of free hard disk space
■
XGA (1024 × 768) or better display adapter and monitor
■
Installing the Software
Follow these steps to install the software:
1. Insert the projector software CD-ROM in your computer's
CD-ROM drive. You see this screen:
Click here