Epson 810 User Manual page 58

The picture is upside-down or reversed.
Change the
Projection
Only part of the picture is displayed, or the picture is distorted.
■
Press the
■
If the Aspect is set to
top or bottom section of the screen so that subtitles are visible (see page 43).
■
Check the
■
Use the
Position
■
If you've connected a computer and you see only half the image, make sure the
computer's Dual Display setting is turned off.
The picture isn't rectangular.
■
If the image looks like
screen and angled toward it. Face the projector straight ahead (instead of at the center of
the screen), then use the horizontal lens shift dial to center the image (see page 24).
■
If the image looks like
function to correct its shape (see page 25). Or press the u and d buttons on the
projector's control panel.
Note: You won't have to use the Keystone function to correct the image, as long as you place the
projector level (not angled up or down) and at a height between the top and bottom of the screen.
Then use the vertical lens shift dial to position the image. This produces the best-looking picture.
The picture contains static or noise.
■
Make sure the
page 45).
■
If you're viewing still images and you notice flickering or horizontal lines, turn on the
Progressive
■
Make sure your cables are securely connected at both ends.
■
If you're using an extension cable, you may pick up interference unless you use a signal
amplifier.
■
If you're displaying the same image on your computer and projector screen, try turning
off your laptop's LCD display (see page 57).
58
Problem Solving
setting in the Settings menu (see page 45).
button to select a different aspect ratio (see page 26).
Aspect
, you may need to use the
Zoom
to make sure it's adjusted correctly (see page 43).
Output Scaling
setting to reposition the image on the screen (see page 43).
or
or
is set correctly for your connected video equipment (see
Input Signal
setting (see page 37).
Zoom Caption
, the projector has been placed off to one side of the
, use the remote control to access the
option to see the
Keystone