Epson 810 User Manual page 39

■ RGB
Picture > Color Adjustment > RGB/RGBCMY > RGB
Note: If you cannot access the RGB settings, highlight RGB/RGBCMY (the first item in the
menu list) and press the
Use the RGB settings to fine-tune the color of the image. You can adjust the offset and
gain for each signal color (red, green, and blue). Use
for the lightest shades.
Gain
■ RGBCMY
Picture > Color Adjustment > RGBCMY > RGBCMY
Note: If you cannot access the RGBCMY settings, highlight RGB/RGBCMY (the first item in
the menu list) and press the
Use the RGBCMY settings to adjust the hue and saturation of the six color components
(red, green, blue, cyan, magenta, yellow). After adjusting each color, press
to move to another menu option.
Return
■ Gamma
Picture > Color Adjustment > Gamma
You can select from 5 gamma settings (2.0 to 2.4) or customize your own setting from
your image or a displayed graph. Lower values will increase the contrast of dark areas, but
tend to blur the bright areas. Higher values will darken the light areas.
You can also access this setting by pressing the
See page 30 for more information.
Select button, then choose RGB in the sub-menu.
Select button, then choose RGBCMY in the sub-menu.
Gamma
to adjust darker shades and
Offset
button on the remote control.
Making Detailed Adjustments
or select
Esc
39