Installing The Software; Connecting Needed Cables; Installing The Software For Windows - Epson PowerLite 5350 User Manual

Installing the Software

Connecting Needed Cables

Installing the Software for Windows

4 • Using ELP Link IV
102
ELP Link IV software can be used with the following operating
systems:
Windows 3.1
Windows 95 or 98
Windows NT 3.51 or 4.0
Macintosh OS System 7.5 and OS System 8.x.
Before installing the software, make sure the projector is properly
connected to your computer. See Chapter 1 for instructions on
installing the main and serial cables needed to use the ELP Link IV
software.
Follow these steps to install ELP Link IV for Windows 3.x,
Windows 95 or 98, or Windows NT:
1. Turn on your computer and start Windows.
2. Insert the Projector Software CD into your CD-ROM drive.
3. If you have Windows 95, 98, or NT, click Start and then Run.
If you have Windows 3.x, in Program Manager click on the File
menu, then on Run.