Rear IR
Receiver
Repeater
A/C Power Inlet
Connecting to a PC Desktop Computer
To connect the projector to your PC desktop computer, you need to:
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.
Note: Computer configurations vary. See your computer manual for the
location of the ports needed to connect your projector.
1 • Setting Up the Projector
22
Audio Out
Computer Out
R/R-Y G/Y G Sync B/B-Y
Connect the projector video cable and computer monitor cable
Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the ELP Link IV software)
Connect the audio cable (if you'll be projecting with audio)
Audio 2 In
Mouse/Com 2
1
S-Video In
Composite Video In
Computer 2 or BNC Video Switch
Audio 1 In
Mouse/Com 1
Computer 2
Computer 1
HD/Sync VD
L & R Audio In