Epson PowerLite 53c User Manual page 76

note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your laptop or computer
monitor.
Solving Problems
70
The colors of the image are not right.
If you're displaying a computer image, use the
option in the projector's Video menu to adjust the color. If you're
displaying video, adjust the
menu. See page 40 for instructions.
Adjust the
Brightness
Try adjusting the
Color Temp
If the images appear too green or too purple, check that the
setting is correct on the Video menu.
Signal
Check your computer display settings to correct the color balance.
The lamp may be nearing time for replacement. Check the lamp
hours as described on page 48 and replace it, if necessary, as
described on page 55.
There is no sound.
Try turning up the volume (see page 42).
If you're using a VCR or other video source, make sure its volume
is not turned all the way down or muted. Also, make sure the
cables are connected correctly, as described in Chapter 1.
If your presentation includes computer audio, make sure the
volume control on your computer is not turned all the way down
or muted. Make sure the audio cable is securely connected to both
the projector and your computer's
audio out jack. See page 14 (for laptops) or Appendix A (for
other systems).
Make sure the Windows volume controls on your computer are
not turned all the way down or set to Mute. Check this by
clicking the volume control in your Windows System Tray (lower
right corner of the screen).
Make sure the
A/V Mute
The wrong source may be selected. Press the
the projector—or the
the remote control—to select the correct source.
and settings on the Video
Color Tint
and settings on the Video menu.
Contrast
setting on the Advanced menu.
headphone jack or
button is not enabled.
or
Computer S-Video/Video
Color Mode
Input
button on
Source
button on