Epson PowerLite 53c User Manual page 62

warning
This product includes a lamp
component that contains
mercury. Please consult your
state and local regulations
regarding disposal or
recycling. Do not put it in the
trash.
Maintaining and Transporting the Projector
56
4. Use the screwdriver included with the replacement lamp to slide
the edge of the lamp cover towards the side of the projector. Then
lift off the cover.
)
5. Use the screwdriver to loosen the two screws holding the lamp in
place. The screws are deep inside the projector on the sides of the
lamp. (You can't remove the screws.)
6. Hold the lamp by the top, as shown, and pull the lamp straight
out.
1
2
Don't remove these screws