Changing Menu Settings - Epson PowerLite 53c User Manual

Changing Menu Settings

Use the buttons on the remote control to access the menus and change
settings. Follow these steps:
1. To display the menu screen, press the
remote control. You see the menu screen:
Video
Audio
Setting
Menus
User's Logo
Advanced
About
Reset All
[ ]: Select
The seven menus are listed on the left, and the options available
for the highlighted menu are shown on the right.
2. Press up or down on the directional buttons to scroll through the
menu list.
3. When the menu you want is highlighted, press the
to select it. The highlight moves to the first option for that menu.
4. Use the directional buttons to scroll through the list of options.
(If a computer or video source isn't connected, certain options
may be unavailable.)
5. Use the directional buttons and
setting for the selected option. Enabled settings are highlighted.
6. Press the button to return to the main menu. Your changes
Esc
are saved automatically.
7. Press again (or the
Esc
Menu
Menu options
Position
Adjust
0000
Tracking :
Sync . : 0
Brightness : 0 0
Contrast :
0 0
Sharpness : 0 0
Color Mode Color Mode Select
Input Signal : : Select
: [Computer
Auto Setup : ON OFF
Reset
Execute
[ ]: Enter
button to change the
Enter
button) to exit the menu system.
Menu
button on the
+
-
- +
+
-
[Normal [Normal ] ]
]
[Menu]: Exit
button
Enter
Fine-tuning the Projector
Menu Directional buttons
Power
Page down Page up
Computer S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom
Enter
Auto ESC
note
If you want to go back to the
default settings on any menu,
select Reset, press Enter,
select Yes, and then press
Enter.
39