Tools Required - Craftsman INCREDI.PULL 316.794711 Operator's Manual

CRAFTSMAN 2 YEAR FULL WARRANTY
FOR 2 YEARS from the date of purchase, this product is warranted against any defects in material or workmanship. A defective product will receive free repair
or replacement if repair is unavailable.
For warranty coverage details to obtain free repair or replacement, visit the web site: www.craftsman.com
This warranty covers ONLY defects in material and workmanship. Warranty coverage does NOT include:
• Expendable items that can wear out from normal use within the warranty period, such as air cleaner or spark plug.
• Product damage resulting from user attempts at product modification or repair or caused by product accessories.
• Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
• Preventive maintenance, or repairs necessary due to improper fuel mixture, contaminated or stale fuel.
This warranty is void if this product is ever used while providing commercial services or if rented to another person. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
APPLICATIONS G ip
• Cleaning yards, garages, driveways, porches, patios,
around walls, fences and more
on/off Switch
Trigger
TOOLS REQUIRED:
* Flathead Screwdriver
Cruise Control
Spark Plug Cover
Upper Blower Tube
(Straight)
Oil Plug
Starter Rope Grip
Lower Blower Tube
(Curved)
ASSEMBLING UNIT BlowerOutlet
Installing the Upper Blower Tube
1. Align the bump on the end of the upper
Blower
upper blower tube with the bump Tube
slot on the bottom end of the blower
outlet (Fig. 1).
2. Insert the upper blower tube into the
blower outlet (Fig. 1).
3. Twist the upper blower tube clockwise
until it locks into place (Fig. 1).
Installing the Lower Blower Tube upper Blower
Tube
1. Align the bump slot on the top end of
the lower blower tube with the bump Lower
on the end of the upper blower tube Blower
(Fig. 2). Tube
\
2. Place the lower blower tube onto the \
upper blower tube (Fig. 2).
3. Twist the lower blower tube
clockwise until tight (Fig. 2).
Fig. 1
Bump Slot
Bump
Bump
Bump Slot
Removing the Upper Blower Tube
1. Hold the unit firmly.
2. Insert a flathead screwdriver into
the tube lock. Twist the screwdriver
counterclockwise 1/4 turn and hold
(Fig. 3).
3. Grasp the upper blower tube and
twist it counterclockwise (Fig. 3).
4. Pull the upper blower tube from the
blower outlet. Fig,3
Removing the Lower Blower Tube
1. Hold the upper blower tube firmly.
2. Grasp the lower blower tube and twist it counterclockwise until the lower
blower tube unlocks from the upper blower tube.
3. Remove the lower blower tube from the upper blower tube.
Fig. 2
4