Advertisement
CAUTION: BEFORE PERFORMING
ANY SERVICE OR ADJUSTMENTS:
1.Depress brake p edal fullyand setparking brake.
2.Race attachment
clutch in
"DISENGAGED" position.
3. Tum ignition key "OFF" and remove key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect spark plug wire from spark plug and place wire where it cannot
come in contact with plug,
TRACTOR
TO REMOVE MOWER
1. Place attachment clutch in "DISEN-
GAGED" position.
2. If equipped, turn height adjustment
knob to lowest setting.
3. Lower mower to its lowest position.
4. Disengage belt tension rod from lock
bracket.
_CAUTION:
Rod is spring loaded. Have
a tight grip on rod and release slowly.
5. Remove retainer spring holding anti-
swaybar to chassis bracket and
disengage anti-swaybar from bracket.
6. Remove four retainer springs from
front plate assembly and remove
plate.
Suspension
BeltTension
Rod
•
O
(Disengaged -,_',
Position)
/_'
Chassis
7. Remove retainer springs from
suspension arms at deck and disen-
gage arms from deck.
8. Raise attachment liftto its highest
position.
9. Slide mower forward and remove belt
from electric clutch pulley.
10.Slide mower out from under right side
of tractor.
TO INSTALL MOWER
Follow procedure described in =INSTALL
MOWER AND DRIVE BELT"in the
Assembly section of this manual.
Electdc
Clutch Pulley
Front Mower
Bracket
Front
Rate
Retainer
Anti-Sway
Bar
F
RetainerSpdngs
(Both Sides)
Mower
Bracket
23
Advertisement
