Xen Citrix San Rules; Xen San Configuration Rules - HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays Reference Manual

Xen Citrix SAN rules

This section describes the SAN rules for Xen.
For current storage system support, see the SPOCK website at http://www.hp.com/storage/spock.
You must sign up for an HP Passport to enable access.
Table 113 describes SAN rules for Xen
Table 113 Xen SAN configuration rules
1
Storage systems
All supported
MSA2000fc G2
(MSA2300fc)
MSA2000fc
XP20000
XP10000
XP24000
XP12000
EVA4000 EVA6400
EVA4100 EVA8000
EVA4400 EVA8100
EVA6000 EVA8400
EVA6100
1
Unlisted but supported storage systems have no additional SAN configuration restrictions. For the latest support information, contact an
HP storage representative.
Supports multipathing high-availability configuration in multiple fabrics or in a single fabric with
zoned paths.
Zoning is required when Xen is used in a heterogeneous SAN with other operating systems.
For HBA parameter settings, see
Supports boot from SAN
Supports Device Mapper 4.3
Zoning is required when Xen is used in a heterogeneous SAN with other operating systems.
Supports active/active or active/passives failover mode.
Supports boot from SAN. For more information, see
Zoning is required when Xen is used in a heterogeneous SAN with other operating systems.
Supports connection of single HBA servers.
Supports boot from SAN. For more information, see
For HP Continuous Access EVA configuration information, see
tegration" on page 254.
Xen SAN rules
Table 117 on page 237.
"XP and VA SAN boot
"EVA SAN boot
SAN Design Reference Guide
support" on page 268.
support" on page 256.
"HP Continuous Access EVA SAN in-
231