Advanced Bios Features - Gigabyte GA-MA790GP-DS4H User Manual

2-5

Advanced BIOS Features

Internal Graphics Mode
UMA Frame Buffer Size
x Surround View
Onboard VGA output connect
Virtualization
Patch AMD TLB Erratum
AMD K8 Cool&Quiet control
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Full Screen LOGO Show
Init Display First
: Move Enter: Select
F5: Previous Values
Internal Graphics Mode
Allows you to determine whether to allocate memory for the onboard graphics controller from the
system memory or SidePort memory
Disabled
UMA
UMA+SidePort
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. Options are: Auto
(default), 128MB, 256MB, 512MB.
Surround View
Enables or disables the Surround V iew function. This option is configurable only if an ATI graphics
card is installed. (Default: Disabled)
Onboard VGA output connect
Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.
Auto
D-SUB/DVI
D-SUB/HDMI
(Note) This item is present only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Advanced BIOS Features
(Note)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables the onboard graphics controller.
Allocates memory for the onboard graphics controller from the system
memory.
Allocates memory for the onboard graphics controller from the system
memory and SidePort memory. (Default)
BIOS automatically determines the primary display port for output,
depending on to which port the display device is connected, D-SUB/DVI-D
or D-SUB/HDMI. (Default)
Sets the D-SUB/DVI-D as the graphics display.
Sets the D-SUB/HDMI as the graphics display.
[UMA+SidePort]
[Auto]
Disabled
[Auto]
[Disabled]
[Enabled]
[Auto]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Disabled]
[Enabled]
[PEG]
F10: Save
- 4 7 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup