Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-MA790GP-DS4H User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

HT Link Frequency
CPU Clock Ratio
Memory Controller Freq.
CPU Host Clock Control
x CPU Frequency (MHz)
PCIE Clock (MHz)
VGA Core Clock control
x VGA Core Clock (Mhz)
Set Memory Clock
x Memory Clock
(Note)
DCTs Mode
DRAM Configuration
******** System Voltage Optimized
System Voltage Control
SouthBridge Volt Control
SidePort Mem Volt Control
NorthBridge Volt Control
DDR2 Voltage Control
CPU NB VID Control
: Move Enter: Select
F5: Previous Values
CPU Voltage Control
Normal CPU Vcore
: Move Enter: Select
F5: Previous Values
• Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.
(Note) This item is present only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
MB Intelligent Tweaker(M.I.T.)
(Note)
********
(µù )
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
MB Intelligent Tweaker(M.I.T.)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Auto]
[Auto]
[Auto] 1800Mhz
[Auto]
200
[Auto]
[Disabled]
650
[Auto]
DDR 533
[Unganged]
[Press Enter]
[Manual]
[Normal]
[Normal]
[Normal]
[Normal]
[Normal]
F10: Save
[Normal]
1.3500V
F10: Save
- 4 1 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup