Create Arrays Manually - Gigabyte GA-MA78GPM-UD2H User Manual

Create Arrays Manually

To create a new array, press <2> to enter the Define LD window (Figure 4). The Define LD selection
from the Main Menu allows users to begin the process of manually defining the drive elements and
RAID levels for one or multiple disk arrays attached to the AMD SB700 controller.
FastBuild (tm) Utility (c) 2008 Advanced Micro Devices, Inc.
LD No
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD 10
[] Up [] Down
In Figure 4, use the up or down arrow key to move to a logical disk set and press <Enter> to enter the
RAID configuration menu (Figure 5).
FastBuild (tm) Utility (c) 2008 Advanced Micro Devices, Inc.
LD No
LD 1
Stripe Block:
Gigabyte Boundary:
Channel:ID
1:Mas WDC WD800JD-22LSA0
2:Mas WDC WD800JD-22LSA0
[] Up [] Down
GA-MA78GPM-UD2H Motherboard
[ Define LD Menu
RAID Mode Total Drv
----
----
----
----
----
----
----
----
----
----
[ Keys Available
[ESC] Exit
[ Define LD Menu
RAID Mode Total Drv
RAID 0
64 KB
ON
[ Drives Assignments
Drive Model
[ Keys Available
[ESC] Exit [Space] Change
]
Capacity (GB)
---- -----
---- -----
---- -----
---- -----
---- -----
---- -----
---- -----
---- -----
---- -----
---- -----
]
[Enter] Select
Figure 4
]
0
Fast Init:
Cache Mode:
]
Capabilities Capacity (GB)
SATA 3G
SATA 3G
]
[Ctrl-Y] Save
Figure 5
- 78 -
Status
----
----
----
----
----
----
----
----
----
----
ON
WriteThru
Assignment
79.89 N
80.02 N
[PgUp/Dn] Page Change