Advanced Bios Features - Gigabyte GA-MA78GPM-UD2H User Manual

2-5

Advanced BIOS Features

Internal Graphics Mode
UMA Frame Buffer Size
x Surround View
Onboard VGA output connect
AMD C1E Support
Virtualization
Patch AMD TLB Erratum
AMD K8 Cool&Quiet control
 Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Init Display First
: Move
Enter: Select
F5: Previous Values
Internal Graphics Mode
Allows you to determine whether to allocate the system memory for the onboard graphics controller.
UMA
UMA+SidePort
Disabled
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default),
128MB, 256MB, 512MB.
Surround View
This option is configurable only when Init Display First is set to PEG. Enables or disables the
Surround View function. This option is configurable only if an ATI graphics card is installed.
(Default: Disabled)
Onboard VGA output connect
Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.
D-SUB/DVI
D-SUB/HDMI
AMD C1E Support
Enables or disables the C1E CPU power-saving function in system halt state. When set to
Software SMI, the CPU core frequency and voltage will be reduced during system halt state to
decrease power consumption. (Default: Software SMI)
(Note) This item is present only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Advanced BIOS Features
(Note)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allocates memory for the onboard graphics controller from the system
memory.
Allocates memory for the onboard graphics controller from the system
memory and SidePort memory. (Default)
Disables the onboard graphics controller.
Sets the D-SUB/DVI-D as the graphics display. (Default)
Sets the D-SUB/HDMI as the graphics display.
[UMA+SidePort]
[Auto]
Disabled
[D-SUB/DVI]
[Software SMI]
[Disabled]
[Enabled]
[Auto]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Disabled]
[PCI Slot]
F10: Save
- 45 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup