Enabling The Dts (Digital Theater Systems) Function - Gigabyte GA-MA78GM-S2HP User Manual

With DTS enabled, the system will transform two-channel stereo source material into multi-channel
audio output, creating a virtual surround sound environment
1. : This button provides you more controls over "dts NEO:PC".
Music Mode ;
2. "dts NEO : PC" :
Press this button to enable or disable the dts NEO : PC function.
Enabling dts NEO : PC allows the system to transform ordinary 2-channel stereo content into 4-,
5.1-, or 7.1- channel surround sound, depending on your speaker configurations.
3. "dts INTERACTIVE" :
If your surround sound system is connected via an
external decoder, click the Audio I/O tab in the Audio
Control Panel. Either click DTS Interactive in the upper
left list or click the dts INTERACTIVE button at the
center bottom of the Audio Control Panel. And click the
dts NEO : PC button. The system will then simulate 5.
1 channel surround sound playback from two-channel
content.
4. Digital PCM Output Setup:
In the Audio Control Panel, click the Audio I/O tab. In
the upper left list, click Digital PCM Output.
Enable this function to allow digital audio sources that
are not digitally processed by DTS encoding to be
output from the S/PDIF OUT.
 Only for GA-MA78GM-S2H(P).
(Note) When DTS Interactive is enabled, only digital auio output (S/PDIF) is working, and you will
not hear sound from analog speaker or headphone.
5-2-3 Enabling the DTS (Digital Theater Systems) Function 
Before DTS is enabled, you would get only 2-channel output signals (from the
front speakers) when playing 2-channel music. You must play 4-, 5.1-, or
7.1- channel music sources to produce 4-, 5.1-, or 7.1- channel audio effects.
After installing the audio driver, at the center bottom of the Audio Control
Panel, you should find the DTS control button as shown below:
Cinema Mode
.
(Note)
DTS control button
- 85 - Appendix