Gigabyte GA-MA78GM-S2HP User Manual page 39

DDR2 Voltage Control
Allows you to set memory voltage.
Normal
+0.1V ~ +0.3V Increases memory voltage by 0.1V to 0.3V at 0.1V increment.
NorthBridge Volt Control
Allows you to set the North Bridge voltage.
Normal
+0.1V ~ +0.3V Increases North Bridge voltage by 0.1V to 0.3V at 0.1V increment.
SouthBridge Volt Control
Allows you to set the South Bridge voltage.
Normal
+0.1V ~ +0.3V Increases South Bridge voltage by 0.1V to 0.3V at 0.1V increment.
CPU NB VID Control
Allows you to set the CPU North Bridge voltage. Normal sets the CPU North Bridge voltage as
required. The adjustable range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU North Bridge voltage may result in damage to your CPU or reduce the useful
life of the CPU.
CPU Voltage Control
Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
(Note) This item is present only if you install a CPU that supports this feature.
Supplies the memory voltage as required. (Default)
Supplies the North Bridge voltage as required. (Default)
Supplies the South Bridge voltage as required. (Default)
(Note)
- 39 - BIOS Setup