Product Specifications - Gigabyte GA-MA785GT-UD3H User Manual

1-2

Product Specifications

CPU
Hyper Transport Bus 
Chipset  North Bridge: AMD 785G
 South Bridge: AMD SB710
Memory
Onboard Graphics 
Audio  Realtek ALC889A codec
 Support for S/PDIF In/Out

LAN
Expansion Slots 
Storage Interface 
USB
Hardware Installation
Support for AM3 processors:

AMD Phenom II processor/ AMD Athlon
™
(Go to GIGABYTE's website for the latest CPU support list.)
5200 MT/s
4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

Dual channel memory architecture

Support for DDR3 1666(O.C.)/1333/1066 MHz memory modules

(Go to GIGABYTE's website for the latest memory support list.)
Integrated in the North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port
(Note 2) (Note 3)
- 1 x HDMI port
(Note 3)
 High Definition Audio
 2/4/5.1/7.1-channel
Support for Dolby

Support for CD In
1 x RTL8111C chip (10/100/1000 Mbit)

1 x PCI Express x16 slot, running at x16 (PCIEX16_1)
1 x PCI Express x16 slot, running at x4 (PCIEX4_1)

(The PCIEX16_1 and PCIEX4_1 slots support ATI Hybrid CrossFireX
technology and conform to PCI Express 2.0 standard.)
3 x PCI Express x1 slots (The PCIEX1_2 and PCIEX1_3 slots share bandwidth

with the PCIEX4_1 slot.)
2 x PCI slots

South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
iTE IT8718 chip:

- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
Integrated in the South Bridge

Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets

connected to the internal USB headers)
Home Theater
®
(Note 5)
- 10 -
II processor
™
(Note 4)
(Note 5)
(Note 1)
™