Features And Controls; Know Your Generator - Craftsman 580.323610 Operator's Manual

KNOW YOUR GENERATOR
Read the Operator's Manual and s afety rules before operating your generator,
Compare the illustrations with your generator to familiarize yourself with the locations of various controls
and adjustments, Save this manual for future reference,
Fuel Tank
\,
I
Rocker
Switch
StatStation
TM
Cleaner
Oil Fill Data Tag
Cap/Dipstick }J
Spark Arrester
120 Volt AC, 20 Amp Muffler
Duplex Receptacles ',,
\
Circuit Breakers
120 Volt AC, 20 Amp, Duplex Receptacles i May
be used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool and motor loads.
Air Cleaner i Protects engine by filtering dust and
debris out of intake air.
Choke Lever i Used when starting a cold engine.
Circuit Breakers (AC) i Push to reset circuit
breakers are provided to protect the generator against
electrical overload.
Data Tag -- Provides model, revision and serial
number of generator. Please have these readily
available when calling for assistance.
Fuel Tank i Capacity of four (4) U.S. gallons (15 I).
Recoil Starter
Choke Lever
Grounding Fastener
Grounding Fastener i Consult your local agency
having jurisdiction for grounding requirements in your
area.
Oil Fill Cap/Dipstick i Check and fill engine with oil
here. See page 16 for oil recommendations and filling
instructions.
Recoil Starter i Used to start the engine.
Rocker Switch -- Set this switch to "On" before using
recoil starter. Set switch to "Off" to switch off engine.
Spark Arrester Muffler -- Exhaust muffler lowers
engine noise and is equipped with a spark arrester
screen.
StatStation
TM
-- Displays the nominal load on
generator based on output frequency. It also has a
built in maintenance reminder.