Table of Contents
Advertisement
Installation
These steps describe procedures for installing and configuring the
AltiTouch 500:
1.
Plug one end of the flat telephone line cord into the line jack on the
back of the phone where it is labeled TEL.LINE and plug the other
end into your modular telephone wall jack.
2.
Connect the AC adapter to an electrical wall outlet and then connect
the AC adapter plug to the "DC 9V" jack on the back of the phone. Use
only with a Class 2 power source, plug polarity, 9V DC, AC adapter.
Figure 2. AltiTouch 500 Connections
3.
Connect one end of the coiled Handset Cord to the jack on the left side
of the phone and connect the other end of the coiled Handset Cord to
the jack on the handset
4.
If you wish to use an Answering Machine, Modem, Fax Machine or
other devices along with your Caller ID telephone, you may plug one
of these devices into the DATA jack on the right side of the phone. The
important thing to remember is that for the Caller ID features to work
properly the Caller ID telephone must be plugged directly into the wall
jack and other devices must be plugged into the Caller ID phone.
5.
Selecting a language
C
H A P T E R
AltiTouch 500 Manual 5
2
Advertisement
Table of Contents
