Hose And Cable Lengths; Electrical Connection - Bosch Nexxt 300 Operating, Care And Installation Instructions Manual

Usea strap or cable tietohold
hoseinplace.
When thewaterisbeing drained,
check thatthewater f lowoutof
thesinkisadequate.
Hose and cable lengths
Left-hand connection
Right-hand connection
a -- 55.0 in. / 140 cm (approx.)
b -- 51.0 in. / 130 cm (approx.)
c = 33.5 in. / 85 cm (approx.)
d -- 39.0 in. / 1O0 cm (max.)
e = 69.0 in. / 175 cm (approx.)
f -- 34.6 in. / 88 cm (approx.)
g -- 55.0 in. / 140 cm (approx.)
h -- 24.0 in. / 60 cm (approx.)
h -- minimum drain point height
Other hoses
Available from appliance dealers:
- Extended supply hose
(approx. 96.1 in./2.44 m).
Electrical connection
GROUNDING INSTRUCTIONS
This appliance must be grounded. In
the event of a malfunction or
breakdown, grounding will reduce the
risk of electrical shock by providing a
path of least resistance for the electric
current.
This appliance features a cord with an
equipment-grounding conductor and a
grounding plug. The plug must be
plugged into an appropriate outlet
which has been properly installed and
grounded in accordance with all local
regulations and ordinances.
Improper connection of the
equipment grounding conductor
may result in electric shock. Have
the appliance checked by
a qualified electrician or service
technician if you are in doubt as to
whether the washer has been
properly grounded.
Do not modify the plug provided with
the appliance - if it will not fit in the
outlet, have a proper outlet installed by
a qualified electrician.
The washing machine must only be
connected to an individual branch
circuit via a socket which has been
properly installed and grounded.
The household electrical voltage must
correspond to the voltage specification
on the washing machine (rating plate,
see page 26).
Connection specifications as well as
the required fuses are stipulated on the
appliance rating plate.
Volts Hertz Amperes Watts
110 120 60 15 1350
(max.)
Make sure that:
- the power plug fits into the socket.
- the wire size is sufficient.
- the grounding system is properly
installed.
The power cord may be replaced by an
electrician only.
Replacement power cords are available
from Customer Service.
To reduce the risk of fire or electrical
shock, DO NOT use an extension
cord or an adapter to connect the
washing machine to the power
supply.
If a ground fault circuit breaker is to be
used, only use types marked with the
following symbol: IZ_.
Only this symbol can guarantee
compliance with all current regulations.
Do not insert/remove the power plug
with wet or damp hands.
Touch the plug only when removing the
plug from the socket.
10