Control Panel; How To Run A Wash Cycle Or A Drying Cycle - Hotpoint AQUALTIS AQM8F 49 I Instructions For Installation And Use Manual

Control panel

WASH CYCLE
SELECTOR
knob
ON/OFF
Button with
indicator light
Button with ON/OFF indicator light: press this briefly
to switch the machine on or off. The green indicator light
indicates that the machine is switched on. To switch off
the washer dryer during the wash cycle, press and hold
the button for approximately 3 seconds; if the button is
pressed briefly or accidentally the machine will not switch
off. If the machine is switched off during a wash cycle, this
wash cycle will be cancelled.
WASH CYCLE SELECTOR knob: may be turned in
either direction. To select the most suitable wash cycle,
please refer to the "Table of wash cycles".
The knob will not move during the wash cycle.
TEMPERATURE button: press to modify or exclude
the temperature setting; the value selected will appear on
the display above (see "Running a wash cycle").
DRY button : press to decrease or exclude drying; the
selected drying level or time will appear on the display (see

"How to run a wash cycle or a drying cycle").

button: press to set a DELAY TIMER
DELAY TIMER
for the selected wash cycle; the set delay time will appear
on the display above (see "Running a wash cycle").
OPTION buttons with indicator lights: press to select the
available options. The indicator light corresponding to the
selected option will remain lit (see "Running a wash cycle").
WASH CYCLE PHASE icons: these illuminate to indicate
the progress of the wash cycle (Wash
Spin/Drain – Drain ).
The text lights up when the cycle is complete.
TEMPERATURE
display
OPTION
buttons with
indicator lights
TEMPERATURE
button
– Rinse –
DRYING
DELAY TIMER/CYCLE
display
DURATION
OPTION
buttons with
indicator lights
DELAY
TIMER
button
DRY
button
START/PAUSE button with indicator light: when the green
indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has begun the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
orange colour. If the "Door locked"
switched off, the door may be opened. To start the wash
cycle from the point at which it was interrupted, press the
button again.
DOOR LOCKED
porthole door is locked. To open the door, pause the wash
cycle (see "Running a wash cycle").
CHILD LOCK
or deactivate the CHILD LOCK, press and hold the button
for approximately 2 seconds. when the indicator light
is illuminated, the control panel is locked. This means it
is possible to prevent wash cycles from being modified
accidentally, especially where there are children in the
home.
ECO indicator light: the
altering the washing parameters, an energy saving of
at least 10% is made. Furthermore, before the machine
enters "Standby" mode, the icon will light up for a few
seconds; when the machine is switched off the estimated
energy saving will be around the 80% mark.
display
ECO
indicator light
START/PAUSE
button with indicator
light
CHILD LOCK
with indicator light
DOOR LOCKED
indicator light
indicator light is
indicator light: indicates that the
button with indicator light: to activate
icon lights up when, after
EN
WASH
CYCLE
PHASE
icons
button
7 7