Hotpoint FDEU9640P Quick Manual

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT
To receive more comprehensive assistance, register the
appliance on
www.hotpoint.co.uk/register

CONTROL PANEL

1. ON/OFF button
2. TEMPERATURE knob
3. DRYING knob
4. WASH CYCLE PROGRESS indicator lights
5. DOOR LOCKED indicator light
6. START/PAUSE button and indicator light
7. FUNCTION buttons and indicator lights
8. WASH CYCLE SELECTOR KNOB
WASH CYCLE TABLE
Maximum load 9 kg
Power input in off mode 0.5 W / in left-on mode 8 W
Wash cycle
1 Anti-Stain
2 Anti-Stain Quick
3 Whites
4 Cotton (2)
5
Eco Cotton (1)
6 Synthetics (3)
7 Anti Allergy
8 Wool
9 Delicates
10 Fast Wash 30'
11 Wash & Dry 45'
12 Drying Cotton
13 Drying Synthetics
14 Drying Wool
Rinse
Spin+Pump out
 Required dosage  Optional dosage
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test programme in compliance with standard EN 50229 (Wash):
This cycle is designed for normally soiled cotton loads and is the most efficient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may differ from the indicated value.
Test programme in compliance with standard EN 50229 (Drying): select the "Cotton"
drying programme and set the drying level to " ", for both loads. The first drying cycle must
be carried out with the nominal load.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
.
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
Max.
Temperature
spin speed
(rpm)
Default Range
40°C - 40°C 1400
40°C - 40°C 1200
60°C - 90°C 1400
40°C - 60°C 1400
60°C - 60°C 1400
40°C - 60°C 1000
60°C - 60°C 1400
40°C - 40°C
30°C - 30°C
30°C - 30°C
30°C - 30°C 1400
– –
– –
– –
– – 1400
– – 1400
1.
2.
3.
4.
5.
6.
7.
8.
1
8
Max.
Duration
load
(minutes)
(kg)
5 185
4,5 60
5 170
9 235
9 225
4,5 125
5 210
800 2 90
0 1 80
800 3,5 30
1 45
– 6 –
– 4 –
– 2 –
9 50
9 10
For all testing institutes:
2) Long cotton cycle: set wash cycle 4 with a temperature of 40°C.
3) Long synthetics cycle: set wash cycle 6 with a temperature of 40°C.
Fabric
Load type
type
Clothing of diff e-
Cotton rent sizes, Terry
towels
Synthe- Sheets, Shirts, Pyja-
tics mas, socks, etc.
Wool Knitwear, Pullovers. etc.
DETERGENT DISPENSER DRAWER
Compartment *:
Do not insert detergent in this compartment.
Compartment 1: Washing detergent (powder
or liquid)
If liquid detergent is used, the removable plastic partition
A (supplied) should be used for proper dosage.
If powder detergent is used, place the partition
into slot B.
Compartment 2: Additives (fabric softeners, etc.)
The fabric softener must not exceed the "MAX" level.
! Use powder detergent for white cotton
garments, for pre-washing, and for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
2 3
7
6
Detergents and
Additives
Fabric
Wash
softener Powder Liquid
Drying
1 2
  
  
  
  
  
  
  
  
  
–
 
  
– –

– –

– –

–
 
– –

Max. Cupboard Henger
load (kg) dry dry
6 255 230
4 220 200
2 210 190
2
GB
5
4
Recommended
detergent
–

–

 
 
 
–

 
–

–

–

–

– –
– –
– –
– –
– –
Iron
dry
200
190
180
A
*
1