Favorite Key; Mode Key; Quickpower - X10 IconRemote IR32A Owner's Manual

Sleep Macro Steps, cont.
• Select "Pick Module." The Pick Room screen appears.
• Select the room that has the module you want to control.
• Select the module using the Side Key. Try a simple "Off"
command for now, but understand that you can string many
commands from different modules and different rooms
together in conjunction with delays as well.
• Select Save and then Done.
• Select Home/Sleep/X10.
• Press the Side Key to toggle when the command(s) will be
sent for 15 minutes to up to an hour and a half away from the
current time. Press OK to exit.
.

Favorite Key

Press the FAVORITE key to select your
favorites group. Then press the Side
Key next to the logo to change your
device to that channel. Selecting a
favorite group that has not yet been set
up, takes you to the setup Wizard.
Important: Make sure you point the
remote at your device until the channel
changes. Pressing a Favorite key might
send the commands for say channel 162,
but if you don't point the remote at your device until all three
digits are sent you might just get channel 16, or even channel 1.
Watch the flickering halo at the bottom left of the screen, it
flickers for each digit sent. It also shows what device is being
controlled.
Press the HOME key at any time to access the screen to do
setups, or access other features.
Before you continue, press Side Key K5 next to the Help icon
and follow the prompts to get an idea of how to use the remote.
Only Devices you've previously set up are displayed. The
others are grayed out.
22

Mode Key

Press the MODE key, then select a device
type to change the mode that the remote is
in. E.g., if the remote is in Cable mode
then the hard keys such as Channel Up/
Down, Volume Up/Down, numbers, etc.,
operate your cable box.
Also, when you select a mode, any extra
keys for that mode and any keys you've
learned for that mode are displayed. The
current mode that the remote is in is shown by an icon in the
lower-left portion of the screen. (The remote screen shown
above is in TV mode.)

QuickPower

QuickPower is a way of quickly turning
all your devices on or off from one easy
to use screen.
•
Press the HOME key to go to the Home
screen.
•
Then press the Side Key next to
QuickPower. Only Devices you've
previously set up are displayed. The
others are grayed out.
•
Press any key that isn't grayed out to
send the "Power" command for that
device.
QuickPower for X10 Devices
• Set up an X10 device using the Wizard
or Add-Edit mode, for example a light in
your Living Room with an LM465
module.
• Select Home/Setup/X10/More/
QuickPower Macro.
• Select Pick Module, and select the command (s) you want to
send. Try a simple "Off" command for now,
but understand that you can string many commands from
different modules and different rooms together in conjunc-
tion with delays as well.
• Select Save and then Done.
• Select Home/QuickPower.
• Press the Side Key next to the X10 icon to trigger the Quick
Power Macro.
X10 Macros
23