Printing On Roll Paper; Windows Instructions - Epson Stylus Photo 2000P Printer Basics Manual

Printing on Roll Paper

You control the way you print on roll paper by selecting the right combination of
printer settings for your document. You can print with small side margins, without
side margins ("bleed" your images to the edges), with guidelines between images to
help you cut them straight, or with a combination of these.
Make sure you've loaded the roll paper as described on page 28. Then follow the steps
in one of these sections:
"Windows Instructions" below
"Macintosh Instructions" on page 32

Windows Instructions

1. Open your image in an application such as Photoshop.
2. Size your image so that it fits onto the paper you've loaded in the printer. For
example, if you want to print edge-to-edge, use your application to adjust the
image size so that it's at least as wide as the paper. If you want white borders on
the top and bottom of your image, make the document size (
Photoshop) larger than the size of the image.
3. Select
Page Setup
Photoshop, you may need to select
see a dialog box similar to this one:
4. Make sure
30
from the File menu. (If you're using an application other than
EPSON Stylus Photo 2000P
or
Print Setup Print
Select your printer here
Click here to make
your printer settings
appears and click the
in
Canvas Size
from the file menu.) You
button.
Properties