Install Software - Epson Stylus NX210 Series Start Here Manual

6

Install software

Your software works with Windows
Windows Vista , and
®
Windows
1
Make sure the printer is NOT CONNECTED to
your computer.
Note:
If you see a Found New Hardware screen,
click Cancel and disconnect the USB cable. You
can't install your software that way.
2
Insert the Epson Stylus NX210 Series software CD.
With Windows Vista, if you see the AutoPlay
window, click Run SETUP.EXE. When you see
the User Account Control screen,
click Continue.
3
Click Install and follow the on-screen instructions.
4
When you see this screen, click the first option and then click Next, unless
the printer is connected to your computer through an external print server.
If you're using an external print server, click the second option,
click Next, then skip to step 6.
5
When prompted, connect a USB cable. Use any open USB port on your
computer.
Note:
If installation doesn't continue after a moment, make sure you
securely connected and turned on the printer.
6
Follow the on-screen instructions to install the rest of the software and
register your printer.
7
When you're done, remove the CD.
You're ready to print, copy, and scan! See your Quick Guide or on-screen Epson
Information Center for instructions.
2000, XP, XP Professional x64 Edition,
®
Mac OS X 10.3.9, 10.4.11, and 10.5.x.
®