Table of Contents
Advertisement
2
2
Install the software
Install the software
Now that you've set up your printer, you can install your
software from the CD-ROM included with this card. The
CD-ROM includes:
the driver that lets you print
A Guided Printing Exercise and Polaroid
PhotoMAX
your electronic EPSON Stylus COLOR 900 Manual
The Guided Printing Exercise and Polaroid
PhotoMAX Pro are not available with Windows 3.1
or Macintosh.
If you don't have a CD-ROM drive, you can download the
drivers or order diskettes from EPSON. See "Ordering
Printer Software Diskettes" in the Printer Basics book.
Keep this card with you as you install your printer
software so you can refer to it when you need to.
Windows 95, 98, or NT 4.0 with
Parallel Connection
Make sure any virus protection programs are
turned off before you begin. For network
configuration instructions, see your Printer Basics
book.
1. Make sure your printer and computer are connected
and turned off.
2. Turn on your computer and wait until you see the
icons on your Windows desktop.
3. Turn on your printer and wait until the
stops flashing.
IMPORTANT:
If at any time you see a screen telling you that Windows
has detected your printer and asking you to install a driver
diskette, ALWAYS select Cancel. You can't install your
software that way.
4. Insert your printer software CD-ROM.
5. Click
Start
D
is your CD-ROM drive letter). Then click
the license agreement and click
™
Pro software
, select
Run
, and type
®
D:\EPSON
Agree
.
power light
(where
OK
. Read
Advertisement
Table of Contents
